1 Inch Flat K9 Collars

Home / 1 Inch Flat K9 Collars

1-inch K9 COLLARS
$54.50
Order

FEATURES

  • COLORS: Black, Chocolate-Brown, Red, Lawn Green, Royal Blue, Bully Pink, Lilac
  • 5”-wide heavy Nylon. Double layer makes collar 1/4” thick.
  • Welded Stainless Steel roller buckle for easy on/easy off.
  • Welded Stainless Steel D-ring is extra heavy gauge and made in the USA.
  • Collar is riveted together around hardware. Rivets are capped on backside so they are smooth against the fur.
  • Double lines of stitching to reinforce edges and discourage fraying along edges.
  • Single row of industrial grommets in the buckle holes prevent buckle holes stretching.
    • Grommets are heat sealed into the material–They will not come out.
  • Tiny D-ring placed near buckle holes is specifically for I.D. tags/rabies tags/county license tags/hanging trackers, etc. Placement is designed so tags hang to one side of dog’s neck during general wear, instead of under the chin.
  • Collars are machine washable.
  • Every collar is custom handmade. For full-grown dogs, we can even make sizes on the ¼” and ½” for a truly custom fit.
  • EMBROIDERY such as POLICE K9/K-9, department name, K9’s name can be added to any collar and in any color. You can also add your department’s/K9’s badge.
    • If you’ll be adding a badge: Badges are typically $10 ea. Check out the main K9 page for photos of badge shapes we have in our files, OR send us a photo of your badge and we’ll find the closest match. If we don’t have your badge style (or anything close to it), contact us to see if we can make it (Pricing for custom badges has a one-time design fee of $45).  Note on your order form: Badge like _______(town name on badge on site) then type what you’d like in each rocker/ribbon panel on the badge. Also note colors for the badge (usually silver or golden yellow) and if it has a colored ring in the middle, type the color the ring should be.
    • If you’ll have lettering on a collar with a badge, let us know the layout. i.e. “POLICE K9 (badge) TRIXIE”; “CHESTER PD (badge) K9 ZAP”; “K9 STUNNER (badge) CHP”; etc…
  • SIZING: To get the correct size, measure your dog’s neck, not the collar your dog is currently wearing. While your dog is sitting or standing, using a soft tape measure (or use a string/shoestring, then measure the string), measure around your dog’s neck in the middle. NO fingers under the tape. Snug but not choking tight. Then add 4” to the measurement.  Neck measurement + 4” = Size to Order.  Refer to Sizing/Measuring photos above for correct way to measure.

1-inch K9 Flat Collar with Center Stripe
$66.50
($54.50 collar + $12 stripe)

 Order

 

If you want more color or design in your collar, add a CenterStripe!

Features

  • All of the features of the 1.5” Regular Flat Collar listed above.
  • Two CenterStripe widths available: 1” or 1.5”.
    • The 1” width still shows the main/base collar on each side of the stripe.
    • The 1.5” stripe covers the surface of the collar. You will still see the edges and ends of the main collar, but the surface of the collar will be the stripe color you choose. i.e. If you want a color or pattern we don’t have as a main collar, say Neon Yellow or Coyote or Olive Drab…, choose a color for the main collar and then choose a 1.5” wide CenterStripe.
  • 24 solid color choices. 18 pattern choices.
  • If you’ll be adding embroidered lettering, it can be placed ON the stripe, on the main collar (aka Break-in-Stripe Design), or both. If you have a collar with a badge and a stripe, the embroidery is typically placed ON the stripe.
    • More EMBROIDERY info: Lettering such as POLICE K9/K-9, department name, K9’s name can be added to any collar and in any color. You can also add your department’s/K9’s badge.
    • If you’ll be adding a badge: Badges are typically $10 ea. Check out the main K9 page for photos of badge shapes we have in our files, OR send us a photo of your badge and we’ll find the closest match. If we don’t have your badge style (or anything close to it), contact us to see if we can make it (Pricing for custom badges has a one-time design fee of $45).  Note on your order form: Badge like _______(town name on badge on site) then type what you’d like in each rocker/ribbon panel on the badge. Also note colors for the badge (usually silver or golden yellow) and if it has a colored ring in the middle, type the color the ring should be.
    • If you’ll have lettering on a collar with a stripe and a badge, let us know the layout. i.e. “POLICE K9 (badge) TRIXIE”; “CHESTER PD (badge) K9 ZAP”; “K9 STUNNER (badge) CHP”; etc…

SIZING:  To get the correct size, measure your dog’s neck, not the collar your dog is currently wearing. While your dog is sitting or standing, using a soft tape measure (or use a string/shoestring, then measure the string), measure around your dog’s neck in the middle. NO fingers under the tape. Snug but not choking tight. Then add 4” to the measurement.  Neck measurement + 4” = Size to Order. Refer to Sizing/Measuring photos above for correct way to measure.

Order your K9 Flat Collar with Embroidery